FAQ
LaqFlat Flatting Formulas
Objective:
The following table has been prepared as a guide to flatting certain Wood Kote lacquers
to achieve factory gloss levels.
Materials Required:
Wood Kote SprayLaq 680,
BrushLaq 680 or KatLaq 680
Wood Kote LaqFlat flatting agent
Wood Kote MacroTint or MiniTint
measuring device
Wood Kote LaqThin T-99 Universal Lacquer Thinner
Metal Spoon
Cleanup cloths
Process:
IMPORTANT: Before adding flatting agent it is necessary to remove an amount of lacquer
from the factory container equal to the amount of flatting agent to be added.
- In the left column of the table below, find the row with the appropriate lacquer product
and gloss level.
Look across the column headings to find the desired gloss level.
The amount of LaqFlat to be added will be listed in the cell where the above
selected column and row intersect.
Remove approximately the indicated amount of lacquer from the factory container .
Set the MacroTint or MiniTint to the correct setting and fill with
LaqFlat to top of the cylinder using a metal spoon.
Discharge the measured LaqFlat into the lacquer.
- Repeat the measuring process if required amount of LaqFlat exceeds the capacity of the
measuring device.
Clean the measuring device with LaqThin T-99 and wipe with a cloth.
LaqFlat should be thoroughly dispersed into the lacquer product using an air or
spark-proof electric mixer or mechanical agitation for less than 2 minutes.
PLEASE NOTE: These formulas are presented as a guide only. It is the responsibility of
the applicator to adjust the final gloss to the appropriate levels.
Flatting Table for 1 Gallon
|
ORIGINAL
PRODUCT |
AMOUNT
(fl oz) OF LaqFlat TO ACHIEVE DESIRED GLOSS LEVEL |
|
1 GALLON
CONTAINER |
SEMI-GLOSS |
SATIN |
MATTE |
|
SprayLaq 680 Gloss |
2-42/48 |
7-33/48 |
16-31/48 |
|
SprayLaq 680 Semi-Gloss |
0 |
4-38/48 |
13-36/48 |
|
SprayLaq 680 Satin |
N/A |
0 |
9- |
|
BrushLaq 680 Gloss |
3-40/48 |
9- |
18-38/48 |
|
BrushLaq 680 Semi-Gloss |
0 |
5-6/48 |
9-38/48 |
|
BrushLaq 680 Satin |
N/A |
0 |
10- |
|
KatLaq 680 Gloss |
2-7/48 |
6-30/48 |
16-31/48 |
|
KatLaq 680 Semi-Gloss |
0 |
4-36/48 |
13-36/48 |
|
KatLaq 680 Satin |
N/A |
0 |
10- |
copyright 2002, Wood Kote
Products, Inc. Website
questions/comments
|